Hifiman HE500 Headphone Replacement Cable ( Screw Type SMC Plug )

$160.00
In Stock Pre order Out of stock

Cable: Leo Copper

Leo Copper
Athena Silver
Litsa Silver

Amplifier Connection: 3.5mm (Single Ended/For Portable Devices)

3.5mm (Single Ended/For Portable Devices)
6.3mm (Single Ended/For Desktop Amplifiers)
2.5mm TRRS (Balanced/For Astell&Kern and Onkyo)
4.4mm TRRRS (Balanced/For Sony)
4 PIN XLR (Balanced)
Add to Wishlist

amazon paymentsamerican expressapple paymaestromasterpaypalvisa

Frequently Bought Together

Total price:$210.00 $205.00
  • This item: Hifiman HE500 Headphone Replacement Cable ( Screw Type SMC Plug ) $160.00
  • 4 PIN XLR FEMALE to 3.5mm TRS MALE ADAPTOR $50.00 $45.00
Description




 Very natural sounding headphone cable which is great for vocal performances.
 
It is a good fit if you want to enhance dynamics and clarity in your headphones and do not want to add coloration. Furthermore, if you do not want to tip the headphone forward or back, then the Leo Cable a wonderful choice.


 QUALITY YOU CAN TRUST
 Most stock headphone cables are made of poor, ultra-thin conductors that work as a bottleneck for sound. Poor geometries, no shielding, rubber jackets, and a whole host of other issues in OEM cables can limit the performance of the headphone driver in terms of clarity and definition.
 
Leo Cables are handcrafted from quality materials in Headgear Audio. All of our cables are created with ultra-pure, single-crystal silver and copper strands and engineered to provide the cleanest, most musical presentation. Our wire is void of impurities and crystalline boundaries, leaving nothing between you and your music.
 
 
 
 
 
 
 
 
SOUND SIGNATURE
The
Leo Cable is our value full size headphone cable. Using Ultra Pure copper strands, it combines the neutrality of the Litsa Copper with the clarity of the Lisa silver at a lower price point. The Leo Cable is a good fit for improving dynamics without adding coloration. Its calm and neutral sound make it a great place to start with premium cables.


 
 
CABLE DESIGN
The Leo Headphone Cable has been designed to match the Litsa silver Cable but with a high purity copper conductor using the Oxygen free Casting Process. The Leo Cable uses OFC pure copper. It is also the best bang for the buck custom headphone cable on the market today.
Each conductor of the Leo Cable is made up of a special varying size stranding geometry. The copper stranding is mixed with Kevlar stranding to reinforce the conductor. This makes it stronger overall and less prone to failure due to the harsh constant flexing a headphone cable receives.
 
 

SLEEVING
 
The Cable is sleeved with beautiful reflectable black premium Paracord made in Netherlands. This Nylon paracord is smooth and pliable which makes it nice to handle while having superior durability and a high 550 lb. tensile strength. It resists rot, mold, mildew and UV damage. Nylon paracord is also more elastic. The quality requirements and the production process of the original paracord are laid down in military specifications (Mil-Spec) of the US Army.
 



It’s All About Connection

A variety of connection options are available for your downstream connection.
The ¼-inch / 6.3mm stereo connector offers the audiophile-standard plug for connection to devices such as headphone amplifiers and A/V receivers, digital audio players, computer-based workstations, analog gear, and more. A balanced, 4.4mm connector opens a pathway to a newer generation of balanced output devices (headphone amplifiers, digital audio players, etc.) that embrace this compact plug’s superior stability over time. A balanced headphone setup offers an even lower noise floor with great dynamic range when connected to balanced source/amp circuit outputs. The listener will thus experience a wider soundstage, tightly controlled transients and impossibly-clear instrument separation. 
 2.5mm Balanced, XLR and a whole host of others. We custom build these in house to your connection specifications. The cable can be used in either a single-ended or balanced design. We use Original Neutrik gold plated connectors which fulfills the highest functional and reliability requirements. Today Neutrik is the world leader in designing, manufacturing and marketing of audio, coaxial, power and circular connectors. The wire is soldered to a connector using high-quality Cardas silver solder.
 
 

  
Seamless Transition from 4 wire to 2 wire

The joints at the middle of stock cable is soldered which makes is vulnerable to breaking at joints. We have developed unique technic which allows seamless transition at joints from 4 wire to 2 wire, this eleiminate need to solder at joint.



SLIDER

We are pleased to offer high quality cable slider designs.They are the best and most durable on the market. Made in USA out of anodized aluminum, they are perfect for tighten fit whenever necessary and will stay in place.
Features
 Made of CNC machined anodized aluminum.
Sliders are cryogenically treated before it is assembled for optimal durability.



TECHNICAL INFORMATION
 
 
  Diameter                 6mm
  Strands                   20
  Length                    1.5m
  AWG                       24
  Core                        4
  Wire                        Copper
  Purity                       OFC
 
 
 6 Months Manufacturer’s Warranty

Manufacturer’s Warranty covers only manufacturing defects. To claim warranty, please maintain a copy of your invoice and contact Headgear Audio.
If you don't see your headphone listed please contact us for a custom build
Custom built — 7-10 business day lead time.

Additional Information
Cable

Leo Copper, Athena Silver, Litsa Silver

Amplifier Connection

3.5mm (Single Ended/For Portable Devices), 6.3mm (Single Ended/For Desktop Amplifiers), 2.5mm TRRS (Balanced/For Astell&Kern and Onkyo), 4.4mm TRRRS (Balanced/For Sony), 4 PIN XLR (Balanced)